Siser Easyweed Electric Heat Transfer vinyl available in over 20 vibrant shades. Best known for adding a colorful metallic shine to any project. To Use: Insert into the machine with the carrier sheet (shiny side) down. Use your software to mirror the design you wish to cut, and cut with your preferred settings. Weed or peel excess vinyl. Preheat the garment for 2-3 seconds. Press for 10-15 seconds with medium pressure at 150℃ or 305℉. If any areas of the design lift after application, replace the cover sheet and re-press 5-10 seconds. Peel off the carrier sheet hot or cold.